ERA Real Estate
Joyce Torelli - Broker, Real Estate Consultant, ERA Real Estate Phone: (508) 380-5229
Email: [email protected]

Miniature Tabletop Plant Stand DIY Guide

by Joyce Torelli - Broker, Real Estate Consultant 08/15/2022

Adding height variation to your plant collection can enhance the entire look of the collection. Even if you have your potted plants on a shelf, table or other surface off of the floor, some plants definitely benefit from sitting up higher. There are plenty of tabletop plant stands available on the market but they’re also easy to build yourself. Here are the materials and steps needed to make your very own miniature plant stands.

Materials & Tools

Square wood dowel
Dowel pins
Wood glue
Wood stain
Sealer
Rag
Plant pot
Measuring tape
Hand saw
Drill & drill bit
Sandpaper or power sander
Clamps

Process

  1. The very first thing you need to do is measure the diameter of the pot you want to use in the stand. If it’s a tapered or round shape, measure both the bottom and the widest point (whether at the top or in the middle).

  2. Measure and cut the wood dowel so that you have 4 “legs.” For the crosspieces, you’ll need one long piece and two smaller pieces to make the cross.

  3. Mark where the drill holes will go. Add drill holes to the center and either end of the crosspieces and into the middle of each side support. Make the holes approximately 1/2 inch deep.

  4. Use glue and dowels to connect the crosspieces. Add a bit of glue to the end of the dowel and fit it into each hole, clamping the pieces together to make sure it’s a firm fit. Once connected, you should have an X shape.

  5. Now add dowels into each end of the cross and secure them with glue. Attach the leg pieces by fitting the dowels into the holes you drilled in the center of each support. Use the clamp to hold everything steady while gluing.

  6. Make sure the glue is dry and check for any sign of wobbling. If you have some slight unevenness in the legs you can sand down the longest one or more to even them out. If there is a dramatic difference, you may need a hand or hack saw to correct it.

  7. Sand all the surfaces thoroughly to prepare for the stain or paint you want to use. Scrape off any extra dried glue you find, since it won’t take the stain or paint.

  8. Once you’re finished sanding and prepping, paint the visible surfaces and add a coat of seal afterward.

  9. Grab your plant pot and test out the stand. Check again for any signs of unevenness or wobbling and adjust accordingly. Experiment to find the best looking spot for your new tabletop plant stand to complement the plant itself as well as offer it the maximum light and air flow.

About the Author
Author

Joyce Torelli - Broker, Real Estate Consultant

Joyce Torelli, Broker - Realtor Consultant 508-380-5229 [email protected] 

CRB, ASR(Accredited Seller Representative), CBR, SRES www.JoyceTorelli.com Please see a few of the Google reviews that recent and past clients have been thoughtful to leave, as well as some written testimonials attached. Top 3% of 375 Professionals – 15 ERA Key Realty Offices.

“I am currently a longtime resident of over 30 years in Marlborough, MA, but mainly grew up in Hudson MA. Later, I had the opportunity to live in various towns in and around the Middlesex County area (Acton, Bolton, Framingham, Hopkinton,) as well as in the Netherlands, Europe. Bringing understanding, insight, and strategy on the home sale marketing and sale process is critical. With over 30 years of experience, I have helped hundreds of homeowners get their home sold for the very best price and terms with the least inconvenience, with skill, caring, and a marketing plan tailored to their needs and their home! My buyer clients benefit from the same 30 years plus of experience of positioning their offers to meet with success in getting accepted, which has resulted in many happy home buyers.